Janus International Archives - Authority Garage Supply | Garage Doors | Garage Door Openers |Tampa

Model 3400: Miami-Dade County Certified Wind Load Rated Rolling Sheet Door

The Model 3400 series commercial roll up door has been specifically engineered for Miami-Dade County, Florida. With an ability to withstand high winds, the sheet metal door meets Miami-Dade County’s stringent building codes. The door is also easy to install and uses a 12” drum wheel. Other features and specific measurements of the door are as follows:

Maximum opening size of 12’ wide x 16’ high (192 sq.ft.)
Push-up, hand chain, and electric operations
PSF Ratings:
- +43 PSF and -49 PSF

DOWNLOAD FLYER

Curtain

24-gauge galvanized corrugated steel
Grade 80 galvanized steel
Available in white only
Super Durable polyester paint coatings, which are corrosion resistant
Wash coat over primer interior side
40-year film integrity warranty – up to 30-year chalk and fade
Flexible nylon wear strips

Bottom Bar

24-gauge acrylic-coated galvalumed roll formed steel
2” x 1 ½” galvanized angle
Bulb astragal (Durometer 75)
Stainless steel nuts and bolts

Axle/Torque Tube

Oil tempered torsion springs conforming to ASTM A229
16-gauge, 12” diameter galvanized drum
Low friction, grease-filled steel ball bearings staked in each drum
26-gauge spiral torque tubing houses axle assembly

Guides

12-gauge galvanized steel guide, with 11-gauge windlock bar spot welded guide
Bolt on head stop ¼” thick steel
2 7/8” guide depth
Pre-punched for lock and attachment bolts
Vinyl guide wear strip

Hardware

Bottom bar mounted 10-gauge slide locks – 2 per door
Bottom bar mounted 16-gauge step plate – 2 per door
12-gauge door mounting brackets
1-5/16” tension holding device

Model 850: Miami-Dade Certified Wind Load Self Storage Door

Model 850: Miami-Dade Certified Wind Load Self Storage Door

The 24-gauge corrugated door curtain is manufactured from full hard galvanized grade 80 steel and coated with Super Durable polyester paint that is backed by a 40-year film integrity and a 25 year no-fade limited paint warranty. Independently tested, the Model 850 meets the requirements of the Miami-Dade County Product Control Division for the high velocity hurricane zone (HVHZ) of the Florida building Code. Design wind load is rated +46 PSF and -54 PSF. Available in opening sizes up to 8’8” x 10’0” and in white only.

DOWNLOAD FLYER

Door Springs

During production, each spring is coated with a generous amount of grease that penetrates the pores of the spring with additives, displacing moisture and preventing the formation of rust and corrosion. In addition, this process relieves the friction created between spring coils thereby providing smoother door operation. Finally, the spring and axle assembly is enclosed in a tube to protect them from the elements encountered throughout the life of the door.

Optional Package Protection and Shipping

Doors stacked on top of each other in transit are going to shift… unless they can be packaged in a way to minimize the sliding that occurs during that time. Janus has found the way. As an option, we can suspend each door individually in crates. Whether they travel down the block or across the country, compaction damages, door abrasion and chatter marks are virtually eliminated.

Ratchet Tensioning Device

The Janus ratchet tensioning device supplied as standard equipment on our door offers a simpler method of tensioning while more accurately fine tuning all the springs on the door at the same time. There is no extra hardware required. Eight different positions on the tension wheel allow one to perfectly balance the door every time. There are no pins required to hold the tension on the spring. You simply just click it.

Radial Ball Bearings

Janus supplies radial ball bearings at no additional cost. Our permanently lubricated bearings require no maintenance and are guaranteed to last the entire life span of the door.

Dead Axle and Torque Tube Assembly

This design, noted for its durability and smoother operation with commercial applications, has now been incorporated into the Janus self-storage door. The tube housing protects the springs and strengthens the axle. Eliminating axle push and shift that can occur with a live axle, the dead axle design allows for a straighter travel path of the door curtain in the guides. The biggest feature of this design is that it affords the fine tuning of any spring adjustment to equally affect all springs on the door at the same time.

Latching

Our patented mini latch features a cover plate made from a heavy gauge yellow zinc coated steel or optional stainless steel. In addition, the latch cover protects the slide from tampering by completely covering the slide, with the exception of a tab used to operate the latch. To further secure the door, the latch’s two-inch throw, with its magnetic properties, can be incorporated with the new guide-mounted security devices. This versatile design affords you the ability to utilize padlocks, cylinder locks or both.

Model 750: Certified Wind Load Self-Storage Roll Up Door

Janus International has achieved wind load certification with the Series 750 Steel Roll Up Door. The Series 750 Certified Wind Load Self Storage Door was designed to meet stringent wind load requirements for mini storage applications while still providing the best door operation in the industry. The innovative door design has minimized the locking and reinforcement needed to strengthen the door to pass rigorous wind load testing.

Product Brochure

FEATURES

FEATURES

Minimizes the locking and reinforcement needed to strengthen the door to pass rigorous wind load testing.
Fewer friction points and less additional weight results in a door that operates better and still yields greater strength than any other available to the self-storage industry.
Meets the requirements of the SBC (Standard Building Code) and ASCE 7 (American Society of Engineers). The ASCE Standard is used in the Florida Building Code and the International Building Code.
Applicable opening sizes range from 3’ wide through 10’ wide, with the maximum height being 12’
Locking device may be located on the curtain or the bottom bar.
Doors may be installed on steel, concrete, or filled block jambs
All door sizes meet the wind load requirements of the interior and exterior zones for 100 mph SBC wind speed and 130 mph exposure B, ASCE 7 wind speed.
Higher wind load ratings are available for certain sizes and can be determined on an individual basis.

Model 650: Self Storage Roll-Up Doors

The Janus International Series 650 steel roll up door has been designed and manufactured to give self-storage facility owners a high amount of value, as the 650 mini storage roll up doors are extremely durable and require virtually no maintenance. Janus doors provide long term savings that it brings when installation, maintenance, and replacement costs. Each metal roll up door comes with a three year workmanship and material warranty. Additionally, a 40-year film integrity and a 30 year no-fade policy for the paint

Product Brochure

Door Springs

Coated with grease during production, which prevents rust and corrosion
Enclosed in a tube for lifetime protection
Provide for smooth door operation

Ratchet Tensioning Device

Allows for simplified spring tensioning
Tensions all springs at once
Requires no pins to hold the tension on the spring

Radial Ball Bearings

Provided at no additional cost
Permanently lubricated
Require virtually no maintenance

Dead Axle and Torque Tube Assembly

Tube housing protects springs and strengthens the axle
Eliminates axle push and shift that a live axle would create
Allows for springs to be turned all at the same time

Model 3100: Certified Wind Load Rated Metal Roll Up Doors

The Janus International 3100 series is our certified wind load rated model that has been manufactured to withstand strong wind forces. Independent laboratory testing has verified that the Model 3100 steel roll up door meets stringent building codes, while the included one-year warranty ensures its quality

Product Brochure

Wind Load

Designed to meet stringent building codes in coastal regions
Utilizes 12” drum wheel
Maximum opening size of 20’ wide x 14’ high (280 sq. ft.)
Push-up, hand chain and electric operations
PSF Ratings:
- +35 PSF and -41 PSF for opening widths through 12’
- +35 PSF and -38 PSF for opening widths over 12’ through 16’

Curtain

26’gauge galvanized corrugated steel
Grade 80 galvanized steel
20 standard colors (special colors upon request for a nominal upcharge)
Super Durable polyester paint coatings, which are corrosion resistant
Wash coat over primer interior side
40-year film integrity warranty – up to 30-year chalk and fade
Flexible nylon wear strips

Bottom Bar

24-gauge acrylic-coated galvalumed roll formed steel
2” x 1 1/2” galvanized angle
Bulb astragal (Durometer 75)

Guides

12-gauge galvanized steel guide, with 11-gauge windlock bar spot welded guide
Bolt on head stop ¼” thick steel
2-7/8” guide depth
Pre-punched for lock and attachment bolts
Vinyl guide wear strip
Universal jamb mount

Hardware

Bottom bar mounted 10-gauge slide locks – 2 per door
Bottom bar mounted 16-gauge step plate – 2 per door
12-gauge door mounting brackets