C.H.I. Overhead Doors Archives - Authority Garage Supply | Garage Doors | Garage Door Openers |Tampa

Model 6500: Counter Shutter

Model 6500: Counter Shutter

The 6500 series roll-up doors offer the best in security, flexibility, and appeal. Reduced sized slats provide for smoother operation and a more aesthetically pleasing appearance. End users and specifiers recognize the 6500 Series as state-of0the-art in design, fit, and finish, yet appreciate the simplicity and practically that define the product.

SPECIFICATIONS AND OPTIONS

	6522	6544	6566
CURTAIN
Flat slat	S	S	S
Exterior Skin
22 gauge, Galvanized [G/W/P/U]	S	–	–
16 gauge (.050”), Extruded aluminum [C/P]	–	S	–
22 gauge, Stainless steel [#4]	–	–	S
BOTTOM BAR
Extruded aluminum [C]	S	S	–
11 gauge, Stainless steel	–	–	S
Tubular stainless steel	–	–	0
LOCKS
Thumb turn lock and handle	S1	S1	O2
Keyed lock and handle	0	0	02
Best cylinder	0	0	02
Stainless steel slide locks	–	–	S
HOOD & HEADPLATE COVERS
24 gauge, Galvanized [G/W/T/U/P]	S	–	–
20 gauge, Aluminum [C/P]	–	S	–
24 gauge, Stainless steel [#4]	–	–	S
GUIDES Fabricated from two pieces of extruded aluminum or formed stainless steel to create guide channel. Guide angles include curtain stops and flared guides.
Extruded aluminum [C]	S	S	S
11 gauge, Stainless steel [#4]	—	—	O
OPERATION
Manual Operation	S3	S3	S3
Awning Crank	O4	O4	O4
Tube Motor	O	O	O
Wall Mounted Motor	O	O	O
STANDARD DIMENSIONS Consult factory for larger sizes.
Width	14’4”	14’4”	14’4”
Height	8’4”	8’4”	8’4”

WARRANTY Manufacturer’s standard 5-year from date of plant shipment against defects in materials or workmanship. Spring wire is warranted for one year. C.H.I.’s obligations are strictly limited to repair or replacement of defective parts and components during the warranty period.
INSTALLATION C.H.I. Rolling Steel Doors shall be installed and adjusted according to C.H.I. assembly instructions by trained door service technicians.

S = Standard O = Optional — = Not available G = Gray W = White C = Clear anodized #4 = #4 polished P = Powder coat U = Unpainted Galvanized
1 Standard for manual and awning crank operated doors. 2 Only available with tubular stainless steel bottom bar. 3 Standard for doors up to 10’4” wide. 4 Standard for door over 10’4” wide.

Model 7500: Fire Shutter

Model 7500: Fire Shutter

Fire protection manufactured to the highest standards, C.H.I. fire shutters feature attractive, space saving designs and user-friendly operation. U.L. labeled for installation to approved drywall, masonry and steel construction, Series 7500 Fire Shutters meet all U.L. requirements for counter and window openings

SPECIFICATIONS AND OPTIONS

	7522	7566
CURTAIN
Flat slat	S	S
Exterior Skin
22 gauge, Galvanized [G/W/P/U]	S	–
22 gauge, Stainless steel [#4]	–	S
BOTTOM BAR
11 gauge, Single angle steel [BK]	S	–
1/8” Single angle stainless steel [M]	–	S
LOCKS
Plated steel slide locks	S	–
Stainless steel slide locks	–	S
HOOD
24 gauge, Galvanized [G/W/U/P]	S	–
24 gauge, Stainless steel [#4]	–	S
GUIDES Fabricated from two formed pieces of 11 gauge steel or stainless steel to create guide channel. Guide angles include curtain stops and flared guides.
Painted steel [BK]	S	–
Stainless steel [#4]	–	S
FIRE RATING
3/4-Hour	Approved	Approved
1-1/2-Hour	Approved	Approved
3-Hour	Approved	Approved
OPERATION
Manual push-up [maximum size is 10’4” x 8’4”]	S1	S1
Awning Crank	S2	S2
Motor	0	0
STANDARD DIMENSIONS Consult factory for larger sizes
Width	13’0”	13’0”
Height	8’4”	8’4”

S = Standard O = Optional — = Not available G = Gray W = White U = Unpainted galvanized #4 = #4 polished P = Powder coat BK = Black † = Gauge is dictated by UL procedure. Call for more information.
1 Standard on doors up to 10’4” wide. 2 Standard on doors up to 13’0” wide.

Model 7000: Guardian™ Fire Doors

Model 7000: Guardian™ Fire Doors

The Guardian™ Fire Door is engineered to meet ever-increasing demands of property owners and insurance underwriters in a simple, easy-to-test, and reset fire protection product with a U.L. label rating from ¾-hour to 4-hour protection. Manual push-up, chain hoist and automatic reset motor operation is available for Guardian™ Fire Doors and can incorporate one of several release device options. The National Fire Protection Association (NFPA) and other model codes recommend frequent drop testing of rolling steel fire doors to ensure a continuous state of operational readiness. C.H.I. strongly promotes these recommendations with the Guardian™ advanced design features

SPECIFICATIONS AND OPTIONS

	7400	7401	7301	7302	7366
CURTAIN
Flat slat	–	S	S	S	S
Curved slat	S	—	—	—	—
Exterior Skin
22 gauge, Galvanized† [G/W/T/B/U/P]	S1	S1	S2	S2	—
20 gauge, Galvanized† [G/W/U/P]	S3	S3	S4	S4	—
18 gauge, Galvanized† [G/W/U/P]	S4	S4	O	—	—
22 gauge, Stainless steel [#4]	—	—	—	—	S
Interior Skin
24 gauge, Galvanized [G/W/T/B/U/P]	—	—	—	S	—
INSULATION
Mineral wool	—	—	—	S	—
R-Value	—	—	—	4.2	—
BOTTOM BAR
Minimum 1/8” double angle steel [BK]	S	S	S	S	—
1/8” Double angle stainless steel [M]	—	—	—	—	S
HOOD
24 gauge, Galvanized [G/W/T/B/U/P]	S	S	S	S	—
24 gauge, Stainless steel [#4]	—	—	—	—	S
GUIDES Fabricated from three (minimum 3/16”) structural steel angles bolted together to form guide channel. Guide angles include curtain stops and flared guides.
Painted steel [BK]	S	S	S	S	S
Hot dipped galvanized steel	O	O	O	O	O
Cold galvanized steel	O	O	O	O	O
Mill finish stainless steel	—	—	—	—	O
FIRE RATING
3/4-Hour	Approved	Approved	Approved	Approved	Approved
1-1/2-Hour	Approved	Approved	Approved	Approved	Approved
3-Hour	Approved	Approved	Approved	Approved	Approved
4-Hour	Approved	Approved	—	—	—
OPERATION
Manual push-up [maximum size is 12’4” x 10’4”]	O	O	O	—	O
Chain hoist	S	S	S	S	S
Motor	O	O	O	O	O
STANDARD DIMENSIONS Consult factory for larger sizes.
Width	24’0”	24’0”	24’0”	24’0”	13’0”
Height	24’0”	24’0”	24’0”	20’4”	24’0”

LOCKING Manual push-up doors furnished with interior slide bolt locks with padlock provision standard. Chain hoist operated doors furnished with chain hoist keeper suitable for padlocking. Optional bottom bar cylinder locking available.

WARRANTY Manufacturer’s standard 5-year from date of plant shipment against defects in materials or workmanship. Spring wire is warranted for one year. C.H.I.’s obligations are strictly limited to repair or replacement of defective parts and components during the warranty period.

INSTALLATION C.H.I. Rolling Steel Doors shall be installed and adjusted according to C.H.I. assembly instructions by trained door service technicians.

S = Standard O = Optional — = Not available G = Gray W = White T = Tan B = Brown U = Unpainted galvanized #4 = #4 polished P = Powder coat BK = Black † = Gauge is dictated by UL procedure. Call for more information.

1 Standard on doors up to 13’4” wide. 2 Standard on doors up to 18’4” wide. 3 Standard on doors from 13’5” to 18’4” wide. 4 Standard on doors from 18’5” to 24’0” wide.

Series 6000: Insulated

These coiling doors are engineered and designed for maximum strength and durability. Manufactured to stringent code standards, this Series 6000 insulated coiling door is an industrial product built to provide a high degree of confidence for specifiers and end users. A wide variety of slat profiles, gauges, and color options are available.

Series 6000: Non-Insulated

Series 6000: Non-Insulated

These coiling doors are engineered and designed for maximum strength and durability. Manufactured to stringent code standards, this Series is an industrial product built without shortcuts to provide a high degree of confidence for specifiers and end users. A wide variety of slat profiles, gauges, and color options are available.

SPECIFICATIONS AND OPTIONS

	6241	6220	6221	6200	6201	6180	6181	6244	6266
CURTAIN
Flat slat	S	—	S	—	S	—	S	S	S
Curved slat	—	S	—	S	—	S	—	—	—
Flat perforated slat [G/P]	—	—	—	—	O	—	—	—	—
Flat fenestrated slat† [see gauge colors]	O	—	O	—	O	—	O	O	O
24 gauge, Galvanized [G/W/T/B/U/P]	S	—	—	—	—	—	—	—	—
22 gauge, Galvanized [G/W/T/B/U/P]	—	S	S	—	—	—	—	—	—
20 gauge, Galvanized [G/W/U/P]	—	—	—	S	S	—	—	—	—
18 gauge, Galvanized [G/W/U/P]	—	—	—	—	—	S	S	—	—
16 gauge (.050”), aluminum [C]	—	—	—	—	—	—	—	S	—
22 gauge, Stainless steel [#4]	—	—	—	—	—	—	—	—	S
BOTTOM BAR
11 gauge, Double angle [U]	S	S1	S1	S1	S1	S1	S1	—	—
Minimum 1/8” double angle steel [BK]	—	S2	S2	S2	S2	S2	S2	—	—
3/16” Double angle aluminum [C]	—	—	—	—	—	—	—	S	—
1/8” Double angle stainless steel [M]	—	—	—	—	—	—	—	—	S
Extruded aluminum (maximum width 14’4”) [C]	O	—	O	—	O	—	O	O	O
HOOD
24 gauge, Galvanized [G/W/T/B/U/P]	S	S	S	S	S	S	S	S	S
18 gauge (.040”) aluminum [C]	—	—	—	—	—	—	—	O	—
24 gauge, Stainless steel [#4]	—	—	—	—	—	—	—	—	O
GUIDES Fabricated from three (minimum 3/16”) structural steel angles bolted together to form guide channel. Guide angles include curtain stops and flared guides.
Painted steel [BK]	S	S	S	S	S	S	S	S	S
Hot dipped galvanized steel	O	O	O	O	O	O	O	O	O
Cold galvanized steel	O	O	O	O	O	O	O	O	O
Clear anodized finish aluminum3	—	—	—	—	—	—	—	O	—
Mill finish stainless steel	—	—	—	—	—	—	—	—	O
OPERATION
Manual push-up [to 80sq.ft. or £8’4” high]	S	O	O	O	O	O	O	O	O
Manual push-up [to 120sq.ft. or £8’4” high]	—	—	—	—	—	—	—	O	—
Chain hoist	S4	S	S	S	S	S	S	S	S
Motor	O	O	O	O	O	O	O	O	O
WINDLOAD
Windbreaker Series	—	O	O	O	O	O	O	—	O
Impact Series	—	O	O	O	O	O	O	—	O
STANDARD DIMENSIONS Consult factory for larger sizes.
Width	12’0”	20’4”	20’4”	28’4”	28’4”	30’0”	30’0”	14’4”	18’4”
Height	14’4”	20’4”	20’4”	28’0”	28’0”	28’0”	28’0”	18’4”	20’4”

WARRANTY Manufacturer’s standard 5-year from date of plant shipment against defects in materials or workmanship. Model 6241 service doors are warranted for one year. Spring wire is warranted for one year. C.H.I.’s obligations are strictly limited to repair or replacement of defective parts and components during the warranty period.

INSTALLATION C.H.I. Rolling Steel Doors shall be installed and adjusted according to C.H.I. assembly instructions by trained door service technicians.

S = Standard O = Optional — = Not available G = Gray W = White T = Tan B = Brown U = Unpainted galvanized C = Clear anodized #4 = #4 polished P = Powder coat BK = Black † = Fenestrations or windows are 5” x 1-1/8” on 7” centers. Specify number and location.

1 Standard on doors up to 14’4” wide. 2 Standard on doors over 14’4” wide. 3 Wall and pack-out angles painted steel. 4 Standard for doors over 10’4” wide and 8’4” high.

Ribbed Steel 3252

Ribbed Steel 3252

C.H.I. offers commercial overhead doors that provide powerful performance and rugged reliability for a wide variety of commercial, warehouse, and industrial applications. We have developed our commercial overhead doors to meet the most difficult site demands and the durability to keep your work crews productive or your trucks moving all day long.

DOWNLOAD FLYER

DOWNLOAD SPEC DATA SHEET

FEATURES

Garage Door Feature

2” Thick Sections
25 gauge commercial quality steel
Polystyrene Insulation with 27-gauge steel back
Ribbed Panel Profile (2 horizontal ribs with alternating “v” grooves)
Max Width – 20’2″ (contact customer service for larger sizes)
Colors – White, stock RAL powder-coat option in 188 colors
R-value 8.00**
Various accessories and options available.

**R-Values have been calculated in accordance with ASTM C518 standards

Warranty >>

SECTIONS

Garage Door Sections

Roll-formed sections are 25-gauge 2” thick, hot-dipped galvanized with a baked-on polyester finish
Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection
Tongue and groove meeting rails provide superior rail strength and weather resistance
Panel Profile: 2 horizontal ribs with alternating “V” grooves

Insulation:

1-1/2” thick CFC free polystyrene
27 gauge Steel inside cover (fastened with plastic retainer strips)
R value 8.00 (R-value Testing is in accordance with ASTM C518 standards)

Colors:

White
Interior color: white polyester primer and topcoat
Optional Colors include RAL powder-coat in 188 colors

Resources

Documents

>>View Door Width/Panels Across Chart
>>View Door Height/Number of Sections Chart

TRACKS

Garage Door Tracks

Tracks are 2” or 3”, as specified
Available in bracket mount, angle mount, clip angle mount, 12” radius, 15” radius, high lift, vertical lift, roof pitch, or dual track low headroom
Optional one (1) piece 2” vertical lift track is available for doors 7’ to 10’ high

Track gauge:

2” Tracks – up to 8’-0” high = 17 gauge roll-formed galvanized steel
2” Tracks – 8’-0” 10’-0” = 16 gauge
2” Tracks – over 10’-0” = 14 gauge
3” Tracks – 12 gauge

Resources

Documents

Standard Lift Doors
Low Headroom
High Lift Doors
Vertical Lift Doors
Reverse Angle Track: Leg In (Steel Jambs Shown)
Bracket Mounted Track Angle Mounted Track: Leg out (Wood Jambs Shown)

HARDWARE

Garage Door Hardware

Package includes 11-gauge or 14-gauge hinges, as specified
2” or 3” long-stem or short-stem steel ball bearings rollers
Single or double end stiles
Heavy-duty adjustable top roller brackets

SPRINGS

Garage Door Hardware

Torsion springs are helically wound with oil-tempered wire
Springs are individually-calibrated for each door
Torsion tubes are galvanized for rust resistance
High-cycle spring options may be specified

LITES

Garage Door Hardware

Optional Window Designs

24” x 6” or 24” x 12” lites with 1/8” DSB glass, polycarbonate, tinted or tempered
Aluminum Frame to match size and panel layout of steel section – Optional field glazing, 1/8” DSB, 1/8″ tempered glass, 1/4” tempered glass, 1/8” Polycarbonate

OPTIONAL ACCESSORIES

Garage Door Optional Accessories

Doors are available with a variety of Specialty Options for specific installation needs. Contact Factory for additional options.

Swing-Up Sectional Post

A perfect answer for openings that are too large for a single overhead door that must accommodate large machinery or equipment on an infrequent basis. Operating on a single pivot point that is designed to swing left or right, it allows the use of one (1) smaller door for everyday requirements and the full opening when needed. See video.

Header & Jamb Seals

Seal the perimeter of the opening to provide additional air infiltration and thermal protection.

WINDLOAD

Garage Door Windload

Wind can be unpredictable and destructive. This is why C.H.I. Windbreaker Series and iSeries doors are designed, tested, and built to the most rugged specifications. Wind chamber tested to ensure windload resistance, these extra-sturdy designs provide enhanced defense against the elements.

C.H.I. Overhead Doors developed the resilient Windbreaker Series garage doors to protect against high wind conditions. The super-resilient C.H.I. iSeries Impact Approved doors have strength designed to withstand direct collision of projectiles and other windborne debris at high speeds.

SPECS/DRAWINGS

SPEC WIZARD

Ribbed Steel 3251

Ribbed Steel 3251

C.H.I. offers a commercial garage door solution that provides powerful performance and rugged reliability for a wide variety of commercial, warehouse, and industrial applications. We have developed our overhead garage door options to meet the most difficult site demands and the durability to keep your work crews productive or your trucks moving all day long.

DOWNLOAD FLYER

DOWNLOAD SPEC DATA SHEET