Accessories
Operator Accessories
  • Clip Kit
  • Gel Cap Kit
  • Wire Kit
  • Battery Backup
Wire Clips for GDO Rails

    Plastic wire clips used for securing safety beam wires to the operator rail, 100 piece bulk pack.

Wire-Clips-for-GDO-Rails-
Wire Splices for GDO Wiring

    Silicone filled wire splices for connecting low-voltage GDO wiring, 100 piece bulk pack.

Wire-Splices-for-GDO-Wiring
GDO Wire and Wire Clips

    Includes 15 sets of GDO safety beam and push button wire and wire clips for attaching wire to GDO rail.

GDO-Wire-and-Wire-Clips
Battery Backup Unit

    This BBU accessory is very easily mounted and complements Linear’s popular LDCO800 DC-powered Garage Door Operator. Exceptionally compact, the BBU mounts entirely inside the LDCO800 enclosure, maintaining the aesthetically-pleasing characteristics of the DC operator, while delivering peace of mind to homeowners when power failure conditions occur. In the absence of AC line power, the BBU will continue to deliver power to the LDCO800 for up to 24 hours, depending upon when the door is first operated after the power outage.

Battery-Backup-Unit
Fire Door Release Device Accessories
  • Smoke Detector
  • Heat Detector
  • Speaker/Strobe
  • Notification Devices

    Smoke detectors can be used to provide a local alarm signal that activates the release device. Three types of detectors are available: Photoelectric, Photothermal detectors, or Ion detectors.

Smoke-detectors

    Heat dectectors provide an alarm signal that activates the release device when the ambient temperature reaches a fixed point. They are available in fixed temperatures of 135 and 194 degrees Fahrenheit.

Heat-dectectors

    A speaker/strobe is an audible/visual notification device used in conjunction with our optional Voice Board. The speaker/strobe is available in 12VDC, 24VDC, or 120VAC. A stand-alone speaker is also available. All speaker/strobes are ADA-compliant.

speakerstrobe

    Notification devices provide a visual and/or audible warning notification. Available types include a stand-alone horn, stand-alone strobes, or a combination horn/strobe. Each type is available in 12VDC, 24VDC, or 120VAC. All notification devices are ADA-compliant.

Notification-devices
More Fire Door Release Device Accessories
  • Speech Module
  • Transformer
  • Option Card

    A solid-state speech module, the optional voice board (VB) may be ordered factory-installed within the XPBB or AFCB models, or purchased separately for retro-fit applications. In an alarm condition, the voice board will provide a warning tone followed by a voice message/warning prior to door closure. It can be used with up to two speaker/strobes or stand-alone speakers.

solid-state-speech-module

    The transformer is used in conjunction with an AFCB model when line voltages other than 120VAC are present at the door installation. Transformers are mounted within an UL508 approved enclosure and are available in the following two options: 90-TRNSFRMR-2 (208VAC 1/3 Phase, 230/460VAC 3 Phase), and 90-TRNSFRMR-5 (575VAC 3 Phase).

transformer

    The FDR plug-in option card is for use in conjunction with the LiftMaster® Logic 3-equipped operator. It facilitates field connections between the LM21AFCB and the operator by reducing the standard 10-wire interconnection to a basic 4-wire phone cord. Both the FDRCARD and the AFCB are equipped with an RJ-11 phone jack as standard to accept the phone cord. The FDRCARD also eliminates the need for ordering the operator with auxiliary open and close limits, which are required for all non-Logic 3 operators.

FDR-plug-in-option-card
Conversion Rails And I-Rails
  • CHCR-7/8
  • CHCR-8
  • CHCR-10
  • HCI12
  • HCI+2
7-foot Carriage House Conversion Rail

    Bolt-on I-rail conversion kit for carriage house doors, fits HBT7C, HCT7C, HBT8C, and HCT8C belt and chain drive rails.

  • For use with carriage house garage doors
  • Converts standard T-rail to stronger I-rail 7-foot length
  • Compatible with Model HBT7C, HCT7C, HBT8C, and HCT8C belt and chain drive rails
  • All conversion hardware included
  • One-piece rolled steel construction
  • Interchangeable with LSO and LDO heads.
7-foot-Carriage-House-Conversion-Rail
8-foot Carriage House Conversion Rail

    Bolt-on I-rail conversion kit for carriage house doors, fits HBT8C and HCT8C belt and chain drive rails.

  • For use with carriage house garage doors
  • Converts standard T-rail to stronger I-rail 8-foot length
  • Compatible with Model HBT8C and HCT8C belt and chain drive rails
  • All conversion hardware included
  • One-piece rolled steel construction Interchangeable with LSO and LDO heads
8-foot-Carriage-House-Conversion-Rail
10-foot Carriage House Conversion Rail

    Bolt-on I-rail conversion kit for carriage house doors, fits HCT10C chain drive rails.

  • For use with carriage house garage doors
  • Converts standard T-rail to stronger I-rail 10-foot length
  • Compatible with Model HCT10C chain drive rails
  • All conversion hardware included
  • One-piece rolled steel construction
  • Interchangeable with LSO and LDO heads
10-foot-Carriage-House-Conversion-Rail
12-Foot Chain Drive I-Rail

    Fully-assembled and pre-tensioned 12-foot chain-drive I-rail for LCO75 door operators.

12-Foot-Chain-Drive-I-Rail
2-Foot Chain Drive Extension I-Rail

    2-foot I-rail extension compatible with the Model HCI12 12-foot chain-drive I-rail for 14-foot I-rail usage in light commercial garage door installations.

2-Foot-Chain-Drive-Extension-I-Rail
close